HP G62-166SB Compaq Presario CQ62 Notebook PC and HP G62 Notebook PC - Mainten - Page 52

Removal and replacement procedures Hard drive ✎ The hard drive spare part kit includes a hard drive bracket and hard drive connector. The hard drive bracket and hard drive connector, as well as the hard drive bracket screws, are also available in the Hard Drive Hardware Kit. Description 750 GB, 5400 rpm (for model 1.2 only) 640 GB, 5400 rpm 500 GB, 7200 rpm 320 GB, 7200 rpm 250 GB, 7200 rpm 160 GB, 7200 rpm Hard Drive Hardware Kit (not illustrated, includes connector, bracket, and screws) Spare part number 603787-001 603785-001 634919-001 599055-001 599054-001 599053-001 599057-001 Before removing the hard drive: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). Remove the hard drive: 1. Loosen the two Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer. 2. Lift the left side of the hard drive cover 2, lift it up and to the left 3, and remove the cover. The hard drive cover is included in the Plastics Kit, spare part number 595200-001. 4-8 Maintenance and Service Guide