HP G62-166SB Compaq Presario CQ62 Notebook PC and HP G62 Notebook PC - Mainten - Page 54

Memory module, that secure the memory module cover to the computer.

Get HP G62-166SB PDF manuals and user guides View all HP G62-166SB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Removal and replacement procedures Memory module Description Memory module, 1 GB, 1066 MHz DDR3 Memory module, 2 GB, 1066 MHz DDR3 Memory module, 4 GB 1066 MHz DDR3 (for model 1.2 only) Memory module, 1 GB 6400 MHz DDR2 (for model 1.1 only) Memory module, 2 GB 6400 MHz, DDR2 (for model 1.1 only) Spare part number 598859-001 598856-001 599092-001 619545-001 619546-001 Before removing the memory module: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). Remove the memory module: 1. Loosen the three Phillips PM2.5×6.0 captive screws 1 that secure the memory module cover to the computer. 2. Lift the back side of the memory module cover cover 2, lift it up 3, and remove the cover. The memory module cover is included in the Plastics Kit, spare part number 595200-001. 4-10 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
4–10
Maintenance and Service Guide
Removal and replacement procedures
Memory module
Before removing the memory module:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then
disconnecting the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-7
).
Remove the memory module:
1. Loosen the three Phillips PM2.5×6.0 captive screws
1
that secure the memory module cover to the computer.
2. Lift the back side of the memory module cover cover
2
, lift it up
3
, and remove the cover. The memory
module cover is included in the Plastics Kit, spare part number 595200-001.
Description
Spare part number
Memory module, 1 GB, 1066 MHz DDR3
598859-001
Memory module, 2 GB, 1066 MHz DDR3
598856-001
Memory module, 4 GB 1066 MHz DDR3 (for model 1.2 only)
599092-001
Memory module, 1 GB 6400 MHz DDR2 (for model 1.1 only)
619545-001
Memory module, 2 GB 6400 MHz, DDR2 (for model 1.1 only)
619546-001