HP G70-100 HP G70 Notebook PC Compaq Presario CQ70 Notebook PC - Maintenance a - Page 44
Remove the Phillips PM2.0×5.0 screw, If it is necessary to replace the optical drive bracket
View all HP G70-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Removal and replacement procedures Remove the optical drive: 1. Position the computer with the left side toward you. 2. Remove the Phillips PM2.0×5.0 screw 1 that secures the optical drive to the computer. 3. Insert a thin tool, such as a paper clip 2, into the release access. (The disc tray is partially ejected from the optical drive.) 4. Grasp the bezel and slide the optical drive 3 out of the computer. 5. If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward you. 6. Remove the two Phillips PM1.5×3.5 screws 1 that secure the optical drive bracket to the optical drive. 7. Remove the optical drive bracket 2. Reverse this procedure to reassemble and install an optical drive. 4-8 Maintenance and Service Guide