HP G70-100 HP G70 Notebook PC Compaq Presario CQ70 Notebook PC - Maintenance a - Page 72

Remove the three Phillips PM2.5x9.0 screws, that secure the system board.

Get HP G70-100 - Notebook PC PDF manuals and user guides View all HP G70-100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Removal and replacement procedures Remove the system board: 1. Disconnect the USB board cable 1 from its mounting clip in the base enclosure. 2. Disconnect the Bluetooth cable 2 from the system board. 3. Disconnect the modem module cable 3 from the system board. 4. Disconnect the audio cable 4 from the system board. Ä CAUTION: Do not attempt to disconnect the optical drive connector before removing the system board. Otherwise, you will damage the locator pin on the optical drive connector. 5. Remove the three Phillips PM2.5x9.0 screws 1 that secure the system board. 6. Remove the two Phillips PM2.0x5.0 screws 2 that secure the optical drive connector. 4-36 Maintenance and Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
4–36
Maintenance and Service Guide
Removal and replacement procedures
Remove the system board:
1. Disconnect the USB board cable
1
from its mounting clip in the base enclosure.
2. Disconnect the Bluetooth cable
2
from the system board.
3. Disconnect the modem module cable
3
from the system board.
4. Disconnect the audio cable
4
from the system board.
Ä
CAUTION:
Do not attempt to disconnect the optical drive connector before removing the system board. Otherwise, you will
damage the locator pin on the optical drive connector.
5. Remove the three Phillips PM2.5x9.0 screws
1
that secure the system board.
6. Remove the two Phillips PM2.0x5.0 screws
2
that secure the optical drive connector.