HP HDX X18T-1200 HP HDX 18 Entertainment PC - Maintenance and Service Guide - Page 55

Power button board, Remove the Phillips PM2.0×4.0 screw

Get HP HDX X18T-1200 PDF manuals and user guides View all HP HDX X18T-1200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Power button board Description Power button board (includes cable) Spare part number 498325-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-8). 5. Remove the switch cover (see "Switch cover" on page 4-18). 6. Remove the switch cover (see "Keyboard cover" on page 4-20). Remove the power button board: 1. Disconnect the power button board cable 1 from the low insertion force (LIF) connector on the power button board. 2. Remove the Phillips PM2.0×4.0 screw 2 that secures the power button board to the computer. 3. Remove the power button board 3. Reverse this procedure to install the power button board. Removal and replacement procedures 4-22

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
Removal and replacement procedures
4–22
Power button board
Before removing the power button board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-8
).
5. Remove the switch cover (see
“Switch cover” on page 4-18
).
6. Remove the switch cover (see
“Keyboard cover” on page 4-20
).
Remove the power button board:
1. Disconnect the power button board cable
1
from the low insertion force (LIF) connector on the power
button board.
2. Remove the Phillips PM2.0×4.0 screw
2
that secures the power button board to the computer.
3. Remove the power button board
3
.
Reverse this procedure to install the power button board.
Description
Spare part number
Power button board (includes cable)
498325-001