HP Indigo 7800 Working with Indigo ElectroInk Invisible Yellow for Indigo 7600
HP Indigo 7800 Manual
View all HP Indigo 7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Indigo 7800 manual content summary:
- HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 1
Working with HP Indigo ElectroInk Invisible Yellow for HP Indigo 7600 Digital Press, HP Indigo 7800 Digital Press, HP Indigo 7900 Digital Press, and HP Indigo 7r Digital Press How-to Guide December 2019 - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 2
age. The HP Indigo Digital Press is a Class 1 laser product. It contains a writing head that is a Class 2 laser product. The complete writing head and the output beam (with a protective cover) are located under the roof of the press engine. During normal press operation and service, the laser beam - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 3
Install the relevant ink as follows:...4 Build the HP Indigo ElectroInk Invisible Yellow as follows:...5 Performing manual BID engage...6 Removing and storing HP Indigo ElectroInk Invisible Yellow and BID...7 3 Troubleshooting ...9 Appendix A Service and support ...10 Printing instructions...10 iii - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 4
was developed to have high permanence under indoors conditions, to specifically fit brand protection and security printing applications. Prerequisites SIt lists the prerequisites required. ● HP Indigo 7600, 7800, 7r and 7900 Digital Presses. ● Press software version 15.2 i43 or higher. ● BID-P new - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 5
papers) include whiteners which give a strong luminescence under UV light. This signal might "drown" or diminish the visibility of the HP Indigo HP Indigo 7600, 7800, 7r and 7900 Digital Presses. It is not supported on HP Indigo 7000/7500 presses manually (see instructions in Performing manual BID - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 6
HP Indigo Conditioning Agent for cleaning when working with a transparent ink; refer to "Using the HP Indigo Conditioning Agent How-to Guide" (CA394-17790). In case you are using the OFIR (On-press below are also clean. (If they are not, clean them manually). ● Ink tank ● BID-FI ● Hoses leading from - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 7
ElectroInk Invisible Yellow It explains building the HP indigo electroink invisible yellow. Install the relevant ink as follows: Follow these step to install the relevant ink as follows. 1. In the press software, go to Main Menu > Ink and BID. 2. Under Ink Management, select Ink List. The list - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 8
electroink invisible yellow. NOTE: The station to be used for the HP Indigo ElectroInk Invisible Yellow must be clean (ink tank, filters, BID and hoses). 1. Go to Main Menu > Ink and BID > Build Ink. Follow the instructions in the Build Ink wizard that appears. 2. Under Build Ink > Method (see - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 9
Under Build Ink > Scan New Ink, select "Invisible Yellow" and press Next. Figure 2-6 Build Ink > Scan New Ink 4. Proceed with the you need to perform the BID calibration manually. 1. Bypass the automatic BID engage: a. Make sure that you are in the right service mode (Shared Maintenance). b. From - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 10
regular yellow. Removing and storing HP Indigo ElectroInk Invisible Yellow and BID If you are not using the HP Indigo ElectroInk Invisible Yellow for a few environment that is the same as the press environment. 5. Clean the ink station and BID with the on-press fast ink replacement (OFIR). If you do - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 11
Replace. Follow the Replace BID wizard. 7. Remove the BID and clean it. Use the BID base particle removal jig for thoroughly cleaning. 8. While manually rotating the BID, clean the rubber developer roller and the metallic squeegee roller with a lint-free wipe soaked with imaging oil. 9. Put the old - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 12
3 Troubleshooting Invisible Ink is visible without UV light: Contamination in the ink thoroughly cleaning the ink pathway, as described in Cleaning the ink station before building the HP Indigo ElectroInk Invisible Yellow on page 3. Figure 3-1 Invisible ink contaminated vs. correct working solution - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 13
76101 Israel APJ HP Asia Pacific Pte Ltd No.3 Tuas Link 4 #02-01 Singapore 637016 Printing instructions Follow these recommendations to achieve the best print quality. NOTE: To ensure a high quality print, use the CA394-10390_PRINT.pdf version of this document. 10 Appendix A Service and support - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 14
Printing Simplex/duplex Color Coating INSIDE PAGES Paper weight Page size Printing Simplex/duplex Color Coating FINISHING Stitch 250 g 8.27 x 11.00 in (21 x 27.94 cm) HP Indigo digital press Front cover - duplex Rear cover - simplex Full color - high resolution Lamination - shiny front and rear - HP Indigo 7800 | Working with Indigo ElectroInk Invisible Yellow for Indigo 7600 - Page 15
© Copyright 2019 HP Development Company, L.P. This is an HP Indigo digital print. www.hp.com/go/indigo PN: CA394-10390