HP Integrity Superdome 2 32-socket HP Integrity Superdome 2 User Service Guide - Page 84
Troubleshooting CAMNet issues
View all HP Integrity Superdome 2 32-socket manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
EBIPA Settings - Device Bay iLO Processors Domain: Subnet Mask: 255.255.255.0 DNS Server1: 0.0.0.0 Server3: 0.0.0.0 Gateway: 172.22.aaa.bbb Server2: 0.0.0.0 Bay Enabled EBIPA Address Current Address Device Type 1 Yes 172.22.a.b 172.22.a.b Server Blade 1A No N/A [Absent] 1B No N/A [Absent] 2 Yes 172.22.a.b 172.22.a.b Server Blade . . SHOW OA NETWORK ALL Onboard Administrator #1 Network Information: Name: OA-1 DHCP: Disabled IP Address: 172.22.aaa.bbb Netmask: 255.255.255.0 Gateway Address: 172.22.aaa.bbb Primary DNS: 0.0.0.0 Secondary DNS: 0.0.0.0 MAC Address: 9C:8E:99:29:xy:yx Link Settings: Auto-Negotiation, 1000 Mbit, Full Duplex Link Status: Active Enclosure IP Mode: Disabled Onboard Administrator #2 Network Information: Name: OA-2 DHCP: Disabled IP Address: 172.22. aaa.bbb Netmask: 255.255.255.0 Gateway Address: 172.22. aaa.bbb Primary DNS: 0.0.0.0 Secondary DNS: 0.0.0.0 MAC Address: 9C:8E:99:29:xy:xy Link Settings: Auto-Negotiation, 1000 Mbit, Full Duplex Link Status: Active Enclosure IP Mode: Disabled Troubleshooting CAMNet issues Check the proper cabling between all the enclosures within a complex using the HR> test camnet command: OA1> show hr OA1 HR> test camnet enclosure9/midplane0 Invoke CAMNet Test on location 0x0900FFFF01FFFF69 CAMNet test has executed without finding faults Success: CAMNet test completed with no errors Test complete OA1 HR> test camnet enclosure1/blade1 Invoke CAMNet Test on location 0x0100FF01FFFFFF94 CAMNet test has executed without finding faults Success: CAMNet test completed with no errors 84 Troubleshooting