HP Integrity Superdome SX2000 Windows Integrity Management Agents Reference - Page 47

Event ID Event Severity Event Description 7974 Error Firmware encountered an error in processing the partition variables Probable Cause: Either the GSP was not present or there was a resource problem storing the variable. There should be other clues in the event id log to indicate which is the case. Restore the GSP. SNMP Trap: hpevtPartitionVariableError - 7974 in HPIFPTRAP.MIB. 7975 Error A non-critical cell power fault has occurred Probable Cause: A power converter has failed. Recommended Action: Contact HP Support personnel to troubleshoot the problem SNMP Trap: hpevtCellRedundtPowerFault - 7975 in HPIFPTRAP.MIB. 8009 Error CPUProcConfigValue in /options is not compatible with the current PAL/CPU Probable Cause: Modify CPUProcConfigValue in /options to set the correct bits. SNMP Trap: hpevtPalProcConfigIncompatible - 8009 in HPIFPTRAP.MIB. 8010 Warning Firmware was unable to determine the Processor Dependent Features Probable Cause: Contact Engineering, This is a bug. SNMP Trap: hpevtPalGetProcFeaturesFailed 8010 in HPIFPTRAP.MIB. 8127 Error Data field contains data meant for firmware debug only. Probable Cause: Debug event. Recommended Action: Contact your hp support representative. SNMP Trap: hpevtPdhcCriticalDebug - 8127 in HPIFPTRAP.MIB. 8128 Error The CLU has encountered an undefined case Probable Cause: CLU firmware on the UGUY has gotten into an unexpected execution path, most likely due to a hardware issue on the UGUY. Recommended Action: Check revision of CLU firmware. If out of date, or known bad revision, use FWUU to update CLU firmware. Contact HP Support personnel to troubleshoot problem SNMP Trap: hpevtCluUndefinedCase 8128 in HPIFPTRAP.MIB. 8130 Warning An unknown Cell voltage margin has been detected. Probable Cause: A user has manually, using back-door debugging methods, altered the voltage margin setting of one or more Cell Board or Cell Power Board converters. SNMP Trap: hpevtCellVoltageMarginUnkn - 8130 in HPIFPTRAP.MIB. 8131 Warning The run-time verification of a programming assumption has failed. Probable Cause: Hardware or software in unknown state. Recommended Action: Upgrade PDHC firmware to latest revision. If already at current revision, contact HP Support personnel to troubleshoot the problem. SNMP Trap: hpevtPdhcAssertionFailed 8131 in HPIFPTRAP.MIB. 8132 Warning An unknown error has been detected by the PDHC firmware. Probable Cause: Hardware in unknown state, or programming bug found. Recommended Action: Recommended Action: Upgrade PDHC firmware to latest revision. If already at current revision, contact HP support personnel to troubleshoot the problem. SNMP Trap: hpevtPdhcFirmwareUnknownErr - 8132 in HPIFPTRAP.MIB. 8133 Warning An attempt to write to a device on the PDHCs I2C bus has failed. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board, and/or PDH Daughtercard. SNMP Trap: hpevtPdhcI2cWriteFailed - 8133 in HPIFPTRAP.MIB. 8134 Warning An attempt to read from a device on the PDHC's I2C bus has failed. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board, and/or PDH Daughtercard. SNMP Trap: hpevtPdhcI2cReadFailed - 8134 in HPIFPTRAP.MIB. 8135 Warning An attempt to write to a device on the PDHC's SM bus has failed. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board, and/or PDH Daughtercard. SNMP Trap: hpevtPdhcSmbusWriteFailed - 8135 in HPIFPTRAP.MIB. 8136 Warning An attempt to read from a device on the PDHC's SM bus has failed. Probable Cause: A hardware fault has occurred. Recommended Action: Contact HP Support personnel to troubleshoot the Cell Board, Cell Power Board, and PDH Daughtercard. SNMP Trap: hpevtPdhcSmbusReadFailed - 8136 in HPIFPTRAP.MIB. Platform Agent Events 47