HP Integrity Superdome SX2000 Ethernet Card (PCIe) Installation Guide for HP I
HP Integrity Superdome SX2000 Manual
 |
View all HP Integrity Superdome SX2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Integrity Superdome SX2000 manual content summary:
- HP Integrity Superdome SX2000 | Ethernet Card (PCIe) Installation Guide for HP I - Page 1
PCIe Ethernet Card Installation Guide for HP Integrity Servers HP-UX, Linux, OpenVMS, and Windows HP Part Number: 5991-6020 Published: April 2008 Edition: 1 - HP Integrity Superdome SX2000 | Ethernet Card (PCIe) Installation Guide for HP I - Page 2
warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Intel, Pentium, Intel Inside, and the Intel Inside logo are trademarks or - HP Integrity Superdome SX2000 | Ethernet Card (PCIe) Installation Guide for HP I - Page 3
• Support Guides and Users Guides, including detailed maintenance and troubleshooting information Prerequisites Review the prerequisites below before performing any installation. • Review the card, technology, and driver documentation. See "Operating Systems Supported on HP Integrity systems - HP Integrity Superdome SX2000 | Ethernet Card (PCIe) Installation Guide for HP I - Page 4
(or slot if using OL*) and any peripheral devices that are attached to the server. Configuring a Card Using HP-UX on HP Integrity Systems To configure the card on a server running HP-UX 11i v1, 11i v2, or 11i v3, follow these steps: 1. Install the card (if needed). See "Installing the PCIe Card - HP Integrity Superdome SX2000 | Ethernet Card (PCIe) Installation Guide for HP I - Page 5
HP-UX 11i v3, use the System Management Homepage (SMH). For further details, see the HP-UX System Administrator's Guide: Configuration Management. On HP Configuring a Card Using OpenVMS on HP Integrity Systems Follow these steps to configure the card on a server running OpenVMS: 1. Install LAN card - HP Integrity Superdome SX2000 | Ethernet Card (PCIe) Installation Guide for HP I - Page 6
HP Integrity servers automatically detect and configure PCIe-compliant adapters when restarting. The adapter Interrupt Request Line (IRQ) level is automatically set by the Extensible Firmware Interface (EFI) each time the server restarts. If you encounter configuration problems, see the HP Support - HP Integrity Superdome SX2000 | Ethernet Card (PCIe) Installation Guide for HP I - Page 7
the new driver version. Verifying the Windows Server 2003 and Windows Server 2008 64-bit Configuration To verify the configuration HP Integrity Systems The method for installing Linux drivers for the Ethernet card varies depending on the Linux distribution you use. For additional instructions - HP Integrity Superdome SX2000 | Ethernet Card (PCIe) Installation Guide for HP I - Page 8
selects DHCP for TCP/IP configuration. To manually configure or makes changes to a card, follow server. 2. To display the Network Setup Method screen, enter the following command: # yast lan By default, the option Traditional Method is checked. 3. Select Next. The Network Card Configuration Overview - HP Integrity Superdome SX2000 | Ethernet Card (PCIe) Installation Guide for HP I - Page 9
9 - HP Integrity Superdome SX2000 | Ethernet Card (PCIe) Installation Guide for HP I - Page 10
*5991-6020* Printed in the US
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
PCIe Ethernet Card Installation Guide for HP
Integrity Servers
HP-UX, Linux, OpenVMS, and Windows
HP Part Number: 5991-6020
Published: April 2008
Edition: 1