HP Integrity rx4640 Internal Cabling Guide for HP Smart Array Controllers - Page 17
Cabling for the HP Integrity rx8640 Server, Installing the HP Smart Array Controller Card
View all HP Integrity rx4640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2 Cabling for the HP Integrity rx8640 Server This chapter describes how to connect the cables of an HP Smart Array controller card to the internal hard drives of an HP Integrity rx8640 Server. NOTE These instructions do not apply if you are connecting the controller card to an external mass storage box. Refer instead to the HP Smart Array Controller User Guide that shipped with your card. Table 2-1 shows the product numbers, descriptions and support matrix for the HP Smart Array controllers supported on the rx8640 server. Table 2-1 Smart Array Cards Available for the HP Integrity rx8640 Server Controller SA6402 SA6404 Product Number Description A9890A A9891A 2 channel / 128 MB cache 4 channel / 256 MB cache Supported on rx8640 Y Y Before you begin, you need: • Cable kit (part number: A7027-63001) • Smart Array controller card: See Table 2-1 for product numbers. NOTE The part and product numbers listed in this document are correct as of the release date of the document. Check http://partsurfer.hp.com for the most current part numbers. Installing the HP Smart Array Controller Card Step 1. If the server is running, shut down the OS, power off the server, and unplug the power cords. Step 2. Remove the top cover of the server. Step 3. If only one HP Smart Array controller card is to be installed, install it into slot 8 of IO Chassis 0 for internal RAID configuration. Step 4. If two HP Smart Array controller cards are to be installed, install them into slots 8 of IO Chassis 0 and IO Chassis 1 for internal RAID configuration. NOTE The HP Smart Array controller card must be installed in PCI slot 8 for internal RAID configurations. If another PCI card is located in slot 8, that card must be relocated to another slot. Chapter 2 13