HP Integrity rx4640 Internal Cabling Guide for HP Smart Array Controllers - Page 29
Cabling for the Server Expansion Unit
View all HP Integrity rx4640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3 Cabling for the Server Expansion Unit This chapter describes how to connect the cables of an HP Smart Array controller card to the internal hard drives of a Server or Server Expansion Unit (SEU) connected to an HP Integrity rx8620 or rx8640 server. NOTE These instructions do not apply if you are connecting the controller card to an external mass storage box. Refer instead to the HP Smart Array Controller User Guide that shipped with your card. Table 3-1 shows the product numbers, descriptions and support matrix for the HP Smart Array controllers supported on the rx8620 and rx8640 servers. If a card is supported in a server, that card is also supported in a SEU connected to that server. Table 3-1 Smart Array Cards Available for the HP Integrity rx8620 Server Controller Product Number Description Supported Supported on rx8620 on rx8640 SA5302 A9825A 2 channel / 128 MB cache Y N SA5304 A9826A 4 channel / 256 MB cache Y N SA6402 A9890A 2 channel / 128 MB cache Y Y SA6404 A9891A 4 channel / 256 MB cache Y Y NOTE When cabling an HP Smart Array controller card to the Server Expansion Unit (SEU), the PCI-X I/O and SCSI HDD Backplane architecture are identical in the rx8620/rx8640 server and in the Server Expansion Unit. Adding the Server Expansion Unit allows for a 3-partition or 4-partition configuration. Before you begin, you need: • Cable kit (part number: A7027-63001) • Smart Array controller card: See Table 3-1 for product numbers. NOTE The part and product numbers listed in this document are correct as of the release date of the document. Check http://partsurfer.hp.com for the most current part numbers. Chapter 3 25