HP J7934G HP Jetdirect Administrator's Guide - Page 83
Table 3.4, Telnet Commands and Parameters 5 of 18, TCP/IP Configuration 83
UPC - 882780135604
View all HP J7934G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Table 3.4 Telnet Commands and Parameters (5 of 18) TCP/IP Main Command Description host-name Alphanumeric string (up to 32 characters), to assign or change the name of the network device. For example, "host-name printer1" assigns the name "printer1" to the device. The default host name is NPIxxxxxx, where xxxxxx are the last six digits of the LAN hardware (MAC) address. ip-config Specify the configuration method: manual: The print server will wait for IP parameters using manual tools (such as Telnet, embedded Web server, control panel, installation/management software). Status will be User Specified. bootp: The print server will send BOOTP requests on the network for dynamic IP configuration. dhcp: The print server will send DHCP requests on the network for dynamic IP configuration. auto_ip: The print server will be automatically configured with a unique link-local address 169.254.x.x. ip IP address for the print server, in dotted notation. For example: ip-config manual ip 192.168.45.39 where ip-config specifies manual configuration and ip manually sets the IP address 192.168.45.39 on the print server. Specifying 0.0.0.0 clears the IP address. If you exit and save a new IP address, it must be specified on the next Telnet connection. subnet-mask A value (in dotted notation) that identifies the network and host portions of an IP address in received messages. For example, subnet-mask 255.255.255.0 stores the subnet mask value 255.255.255.0 on the print server. The value 0.0.0.0 disables the subnet mask. For more information see Appendix A. default-gw The IP address of a default gateway, in dotted notation. For example, default-gw 192.168.40.1 assigns 192.168.40.1 as the IP address of the default gateway for the print server. Note: If the HP Jetdirect print server is configured by DHCP and you manually change the subnet mask or the default gateway address, you should manually change the print server's IP address. This will release the DHCP-assigned address back to the DHCP IP address pool. ENWW TCP/IP Configuration 83