HP Jetdirect 2700w HP Jetdirect 2700w USB Solution Print Server - Setup Guide - Page 9
Introduction, What you need for installation - usb wireless print server
View all HP Jetdirect 2700w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
1 Introduction ● What you need for installation ● For more information Thank you for purchasing the HP Jetdirect 2700w USB Solution Print Server. NOTE: The HP Jetdirect 2700w Print Server complies with IEEE 802.11 wireless standards. What you need for installation You need the following: ● The HP Jetdirect 2700w USB Solution Print Server. ● A supported Microsoft Windows, Apple Macintosh, or Linux/Unix computer. An 802.11b, g, or n wireless LAN (WLAN) interface card must be installed. The following operating systems are supported: ◦ Microsoft Windows Server 2003, Windows Server 2008, Windows 7, Windows Vista, Windows XP ◦ Mac OS X 10.4 and later ◦ UNIX/Linux: Hewlett-Packard HP-UX, Sun Microsystems Solaris, IBM AIX, HP MPE-i, RedHat Linux, SuSE Linux For a complete list of supported operating systems, see Embedded services on page 17. ● A supported HP printer or multifunction peripheral (MFP). Go to http://www.hp.com/go/jetdirect to see a current list of supported printers and MFPs. Your printer/MFP must be operating properly. Use the documentation supplied with your printer/ MFP to assemble and test the device. ● For wireless infrastructure mode only: An access point, wireless router, or Apple AirPort base station. The HP Jetdirect 2700w USB Solution Print Server allows your printer to be accessible on a WLAN through a specific access point. In station (infrastructure) mode, an access point allows wireless devices to connect to your LAN (wired or wireless). For more information, see Infrastructure mode on page 14. ENWW What you need for installation 1