HP Kayak XA 05xx HP Kayak XA Series 05xx, User's Guide for Minitower models - Page 4

ashak.bk : title.fb4 Page iv Wednesday, July 15, 1998 6:41 PM WARNING Who This Manual Is For This manual is for anyone who wants to: • Set up the PC Workstation for the first time. • Configure the PC Workstation. • Add accessories to the PC Workstation. • Troubleshoot problems on the PC Workstation. • Find out where to get more information and support. Important Safety Information If you have any doubt that you can lift the PC Workstation or display safely, do not try to move it without help. For your safety, always connect the equipment to a grounded wall outlet. Always use a power cord with a properly grounded plug, such as the one provided with this equipment, or one in compliance with your national regulations. This PC Workstation is disconnected from the power by removing the power cord from the power outlet. This means the PC Workstation must be located close to a power outlet that is easily accessible. For your safety, never remove the PC Workstation's cover without first removing the power cord from the power outlet, and any connection to a telecommunications network. Always replace the cover on the PC Workstation before switching it on again. To avoid electric shock, do not open the power supply. There are no user-serviceable parts inside. To avoid electric shock and harm from to your eyes by laser light, do not open the laser module. The laser module should be serviced by service personnel only. Do not attempt to make any adjustment to the laser unit. refer to the label on the CD-ROM for power requirements and wavelength. This product is a class 1 laser product. iv English