HP Kayak XA-s 02xx HP Kayak XA-s Series 02xx, Configuring a SCSI Accessorry Fo - Page 2

HP Kayak XA-s 02xx PC Workstation - Configuring a SCSI Accessory Using the SCSI Configuration Utility (Selected Models) Using the SCSI Configuration Utility (Selected Models) The Symbios Logic SCSI Configuration Utility lets you view and change the default configuration for your host adapter and all SCSI devices connected to it, or for individual SCSI devices. Default Settings You Can Change The following two tables show the configuration settings you can change. The first table shows the global settings which impact your host adapter and all SCSI devices connected to it. Be very careful if you change any of these settings. The second table shows the device settings which apply to individual devices. Settings for the Host Adapter and All Devices SCAM Support Parity Host Adapter SCSI ID Scan Order Removable Media support Default Settings On Enabled 7 Low to High (0-Max) None Settings for Individual SCSI Devices Synchronous Transfer Rate (MB/sec) Data Width Disconnect Read Write I/O Timeout (secs) Scan for Devices at Boot Time Scan for SCSI LUNs Queue Tags Default Settings 40 16 On 10 Yes Yes Enabled 2 English