HP Kayak XA-s 02xx HP Kayak XA-s Series 02xx, Configuring a SCSI Accessorry Fo - Page 6
Adapter Setup Menu, SCAM Support, Parity
View all HP Kayak XA-s 02xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
HP Kayak XA-s 02xx PC Workstation - Configuring a SCSI Accessory Using the SCSI Configuration Utility (Selected Models) Adapter Setup Menu When you select Adapter Setup from the Adapter Utilities menu, the Adapter Setup menu is displayed: Symbios Logic SCSI Configuration Utility Version 1.07 1. SYM53C875 Adapter Setup SCAM Support Parity Host SCSI ID Scan Order Removable Media Support CHS Mapping Help. Restore Default Setup. Exit this menu. On Enabled 7 Low to High (0..Max) Use arrow keys to select from menu. Then press ENTER BIOS Code Segment: C800 SCAM Support Parity NOTE The settings in this menu are global settings that effect the selected host adapter and all SCSI devices attached to it. The Symbios Logic BIOS version 4.x and above supports the SCSI Plug and Play protocol called SCAM (SCSI Configured AutoMatically). You can turn this off if you wish. Symbios Logic PCI to SCSI host adapters always generate parity, but some SCSI devices do not. For this reason you can disable parity checking. When disabling parity checking, you may have to disable disconnects for certain devices as parity checking for the re-selection phase is not disabled. If a device does not generate parity, and it disconnects, the I/O never completes because the re-selection never completes. 6 English