HP Kayak XA-s 02xx HP Kayak XA-s Series 02xx, Configuring a SCSI Accessorry Fo - Page 9
Device Setup Menu
View all HP Kayak XA-s 02xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
HP Kayak XA-s 02xx PC Workstation - Configuring a SCSI Accessory Using the SCSI Configuration Utility (Selected Models) Device Setup Menu When you select a device from the Device Selections menu, the Device Setup menu is displayed: Symbios Logic SCSI Configuration Utility Version 1.00 1. SYM53C875 Dev0 N/A Setup Sync Rate (Mega Bytes/sec) Width (bits) Disconnect Read Write I/O Timeout (secs) Scan for Device at Boot Time Scan for SCSI LUNS Queue Tags Format Verify Help. Restore Default Setup Exit this menu. 40 MB/sec 16 On 10 Yes Yes Enabled None Use arrow keys to select from menu. Then press ENTER BIOS Code Segment: C800 This menu provides information about an individual SCSI device. To make changes to these settings, select an item from the list and press . Sync Rate (Mega Bytes/sec) This option lets you set the transfer rate for the device. The available choices are Off, 10 MB/sec, 20 MB/sec, or 40 MB/sec. For example, for a Fast SCSI device, you would select 10 MB/sec. Width (bits) This option lets you set the width, in bits, for the device. The choices are 8 or 16. For example, if the device is an external SCSI device, you would set the width to 8 bits. Disconnect This option lets you enable or disable disconnects for the device. Read Write I/O Timeout This option lets you enter a read write timeout value in seconds for the (sec) device. English 9