HP Kayak XW U3-W3 HP Kayak XW (Series U3-W3), HP Visualize Fx4 Texture Module - Page 13

riotx.bk : riotx-us.fb4 Page 9 Tuesday, December 16, 1997 3:08 PM 1 HP VISUALIZE fx4 Texture Module User's Guide Installing the Texture Module 4 Carefully line up the connectors on the texture module and the VISUALIZE fx4 board. Then using both thumbs, apply pressure to the top of the texture module connector and press the texture board into place. Ensure that the texture module is all the way in. Insert the screw taken from the blank stiffener board here. (The texture module is provided with the three other screws.) Texture Module Texture Module Connector VISUALIZE fx4 Connector 5 Secure the texture module in place by replacing the four screws, using the small screw from the blank stiffener board. English English 9