HP LH3000r HP NetRAID-4M Installation Guide - Page 109
Controller Log Information, Controller Configuration Options, Force Single Container Configuration
View all HP LH3000r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Troubleshooting ! Caution: The Controller Service utility is intended to assist technical support representatives in troubleshooting controller problems; it should not be used under normal operating conditions. Follow these steps to access the Controller Service utility: 1 Press Ctrl-A when the following prompt appears when you turn on or reboot your server: Press for Configuration Utility! 2 If multiple controllers are installed, select the controller you wish to configure and press Enter. 3 Press Ctrl-P to start the Controller Service Utility. A two- option menu appears. 4 Select Additional Controller Configuration to access advanced BIOS settings or select Controller Log Information to view detailed information on the current BIOS log and the previous BIOS log and press Enter. Controller Log Information If you are experiencing system problems, your technical service representative can access the controller log to gain detailed information on the internal operations of the HP NetRAID-4M during the current boot and the previous boot. Controller Configuration Options The following options are available in the Controller Service utility: s Force Single Container Configuration - If Enabled, this option causes the HP NetRAID-4M to configure only the boot container to be able to boot; any other containers are ignored. The default is Disabled. Use this option if you encounter problems booting the controller because of problems with containers other than the boot container. s Boot Mode - This option sets the mode for the next boot. If Normal, then all of the containers and files systems will be configured (if possible) during system boot. If Maintenance, then none of the containers or file systems will be configured. C-3