HP LH4r hp lp 1000r and ds2100 config guide — for Microsoft Windo - Page 7

LP1KR2K2M21 NOTES: 1. Color coding depicts the two different cable part types : To connect server to DS2100 -C7541A - 2 Meter ILT cable To connect DS2100's together C 2978B - 0.5 Meter LVD cable 2. This diagram depicts using two DS2100's. You can use from one to two storage cabinets per cluster. 3. Only connect channel 0 of the NetRAID-2M to the DS2100. Using channel 1 is not supported. 4. There are no 'left'or 'right'port requirements for cabling to the DS2100. Cables can be attached to either port. 5. Connect LAN ports A for the heartbeat cluster interconnect. Use ports B for the client LAN connection. 6. Set the DS2100 SCSI ID switches as shown. B - The following addresses will be assigned to installed disks in the top DS2100: 8, 10, 12, and 14. C - The following addresses will be assigned to installed disks in the bottom DS2100: 9, 11, 13, and 15. × LAN A LAN B Heartbeat - Client LAN Connection -crossover cable or equivalent SCSI Switch A B C SCSI Switch A B C × LAN A LAN B Heartbeat - Client LAN Connection -crossover cable or equivalent connect to NetRAID-2M channel 0 only! HP Netserver LP 1000r Cluster using two HP Surestore DS2100 Disk Systems 11/15/01 7