HP LH4r HP Netserver Alert On LAN 2 (AOL2) User Guide - Page 9
Installing and Using AOL2, Setting Up AOL2 at the Server
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2 Installing and Using AOL2 The follow sections describe how to install, use, and disable the AOL2 feature. Setting Up AOL2 at the Server 1. Boot the NetServer and run the server's BIOS setup program (press F2 when prompted during the boot process). 2. At the main menu, go under Configuration and get to the embedded LAN A port menu. 3. Enable the LAN power on/off and Wake On LAN (WOL) functions. 4. Save and exit. 5. After the Network Operating System is installed, run the NetServer Agents installation program (this may be done from a client). The setup program is located on the HP NetServer Navigator CD-ROM under Manage\Server\language\NOS\setup.exe where language indicates the language (FR=French, GE=German, IT=Italian, SP=Spanish, US=English) and NOS indicates the abbreviation for the version of Windows. 6. Once the NetServer Agents are installed, it is a good idea to go to each server that you will be using AOL2 on and confirm that the two services HPSDNSVC (the shutdown service) and HPAOLSVC (the AOL2 service) are set to "automatic" and have been started (the AOL2 setup program should do this by default). You can do this under Control Panel | Services. The services should be set this way to ensure that they start automatically whenever the server is restarted. NOTE If the IP address of your server ever changes, you will need to either reboot the server or stop and restart the AOL2 service. Not doing so will prevent you from using AOL2 features on your server. 5