HP LH4r hp netserver lc 2000 netraid-4m config guide — for Micros - Page 3
Enclosure, Cables, Power distribution
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
lc20002k4m Shared Storage Configuration Parameter Containers Configuration options Enclosure Disk drives Number of cabinets Model Status SCSI ID Disk SCSI IDs Cables SCSI Power distribution Layout Single-level or multi-level Must be fault-tolerant Eight, maximum, per cluster Write cache disabled Clustering enabled Domain validation enabled Specification Any HP drive supported by storage enclosure. Any combination of HP disk models is allowed in a diskset, on a SCSI channel, or in a cluster. Up to eight Rack Storage/12 D5989B, containing two D6025B SCSI controller cards, or Rack Storage/12 D5989C, containing two D6025C SCSI controller cards 5 (fixed) 0-3, 8-15 (fixed) Any two HP LVD SCSI offset cables per RS/12 from the following list: 1 meter D7131A 2.5 meter D6020A 5 meter D6982A 10 meter D6983A See SCSI cabling diagram on page 5. Redundant power distribution units (PDUs) are recommended. See power cabling diagram on page 5. Microsoft® and HP Certified Server Configuration with NetRAID-1Si Parameter I/O card slot Network interfaces Boot device Specification PCI slot 1, NetRAID-1Si local storage controller PCI slot 5, NetRAID-4M shared storage controller PCI slot 3, Client LAN, model D5013B NIC NetRAID-1Si Microsoft® and HP Certified Server Configuration with NetRAID-1M Parameter I/O card slot Network interfaces Boot device Specification PCI slot 6, NetRAID-1M local storage controller PCI slot 5, NetRAID-4M shared storage controller PCI slot 3, Client LAN, model D5013B NIC NetRAID-1M 1/28/02 3