HP LH4r HP Netserver LH 3 Installation Roadmap

HP LH4r - NetServer - 256 MB RAM Manual

HP LH4r manual content summary:

  • HP LH4r | HP Netserver LH 3 Installation Roadmap - Page 1
    for errors HP automated installation process For NOSs using a vendor-installation process, first create a NOS drivers diskette, and view and print HP NOS Installation Instructions Fourth: Install Server Management Software , , Refer to the HP NetServer Remote Administrator Guide Install HP
  • HP LH4r | HP Netserver LH 3 Installation Roadmap - Page 2
    Verify Installed Accessories (Optional) 12. Configure the HP NetServer Audience Assumptions This road map is intended for the person who installs, administers, and troubleshoots LAN servers. Hewlett-Packard Company assumes that you are qualified in the servicing of computer equipment and trained in
  • HP LH4r | HP Netserver LH 3 Installation Roadmap - Page 3
    containing the drivers and software. ! Fax-Call HP's fax system at 1-800-333-1917 (or 1-208-344-4809 from your fax machine), and request document number 6005 ! Internet WWW-http://www.hp.com/netserver/servsup ! Internet FTP-ftp://ftp.hp.com/pub/servers ! CompuServe-GO HPPC; download 6005.txt
  • HP LH4r | HP Netserver LH 3 Installation Roadmap - Page 4
    instructions and installation recommendations. Some boards have preferred slot locations. If not, consider the boot order (see below) when choosing the accessory board socket in which to install the board. Accessory Board Guide Section 12: "Configure the HP NetServer." Boot Device Priority Boot
  • HP LH4r | HP Netserver LH 3 Installation Roadmap - Page 5
    HP NetServer supports both hot-swap SCSI devices, installed in the hot-swap mass storage cage, and non-hot swap SCSI devices, installed in shelves 3 and 4 (located below the CD-ROM drive hard disk or a tape backup drive. Narrow (50-pin) SCSI devices are supported problems, install hot-swap drives
  • HP LH4r | HP Netserver LH 3 Installation Roadmap - Page 6
    Remote Management: If you plan to manage the HP NetServer LH 3 remotely, refer to the HP NetServer Remote Administrator Guide for instructions. Select "Configure Remote Management" on the Navigator screen to configure Integrated Remote Assistant. 7. Show System Information: Select "View System
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

Notice
The information contained in this document is subject to change
without notice.
Hewlett-Packard makes no warranty of any kind with
regard to this material, including, but not limited to, the
implied warranties of merchantability and fitness for a
particular purpose. Hewlett-Packard shall not be liable for
errors contained herein or for incidental or consequential
damages in connection with the furnishing, performance, or use
of this material.
Hewlett-Packard assumes no responsibility for the use or
reliability of its software on equipment that is not furnished by
Hewlett-Packard.
This document contains proprietary information that is protected
by copyright. All rights are reserved. No part of this document
may be photocopied, reproduced, or translated to another
language without the prior written consent of Hewlett-Packard
Company.
Hewlett-Packard Company
Network Server Division
P.O. Box 58059, Technical Marketing
Santa Clara, CA 95052-8059 USA
© Copyright 1998, Hewlett-Packard Company
LH 3
Installation
Road Map
HP NetServer
Installation Overview
,
,
,
Configure ISA non-Plug-and-Play board (if installed)
Select Network Operating System (NOS)
Configure Integrated Remote Assistant
First: Install Hardware Using this Road Map
Second: Configure Hardware
,
,
Refer to the
Install HP TopTools
HP NetServer Remote Administrator Guide
Fourth: Install Server Management Software
Third: Install NOS
,
,
For certain versions of Novell NetWare and MS Windows NT, you may use the
HP automated installation process
For NOSs using a vendor-installation process, first create a NOS drivers
diskette, and view and print HP NOS Installation Instructions
5967-4216
Printed on recycled paper.
Printed in June 1998
,
,
,
,
,
,
,
,
Verify contents
Obtain HP Navigator CD-ROM release history
View the Readme File
Test the system hardware using Diagnostic Assistant (optional)
Install Information Assistant
Visit Order Assistant (optional)
Install all hardware accessories
Verify installed hardware accessories (optional)