HP LH4r HP Netserver LH 3/LH 3r DIMM Installation Guide
HP LH4r - NetServer - 256 MB RAM Manual
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
HP LH4r manual content summary:
- HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 1
HP NetServer LH 3/LH 3r DIMM Installation Guide HP Part Number 5967-2105 Printed in May 1998 - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 2
Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard Company. Hewlett-Packard Company Network Server Division Technical Marketing/MS 49EU-FQ 5301 Stevens - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 3
v Contents of This Guide v Intended Audience vi Related Documentation vi 1 Introduction 1 Verifying Contents 1 Prepare for Installation 1 Tools You Need 2 2 Preparation 3 Removing the Cover (NetServer LH 3 3 Removing the Cover (NetServer LH 3r 5 Removing the System Board (NetServer LH 3r - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 4
HP NetServer LH 3 15 HP NetServer LH 3r 15 5 Warranty and Support 17 HP Repair and Telephone Support 18 iv - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 5
D6097A, D6098A, and D6099A, in an HP NetServer LH 3 or LH 3r. Contents of This Guide This guide includes the following topics: • An Introduction, including verifying the contents of the shipping box, and important precautionary warnings • Preparation instructions, such as removing the chassis side - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 6
troubleshoots network servers. Hewlett-Packard Company assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels. Related Documentation The following documents describe the HP NetServer LH 3/LH 3r: • The HP NetServer - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 7
WARNING Before removing the cover, always disconnect the power cord and unplug telephone cables. Disconnect the power cord to avoid exposure to high energy levels that may cause burns when parts are shortcircuited by metal objects, such as tools or jewelry. Disconnect telephone cables to avoid - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 8
- HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 9
1 Introduction Verifying Contents The contents of the shipping box include: • One HP qualified DIMM. • The HP NetServer LH 3/LH 3r DIMM Installation Guide. CAUTION To avoid damaging the DIMM with electrostatic discharge, handle the DIMMs in a static-free environment only. Hold the module by its - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 10
Tools You Need To install DIMMs, you need an anti-static service kit (3M™ 8501/8502/8503 or equivalent). This kit includes a static-dissipating Installation Instructions 2 - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 11
2 Preparation This chapter includes guidelines and instructions for installing DIMMs in the specified sequence on the system board. Removing the Cover (NetServer LH 3) To remove a cover: 1. Turn off the HP NetServer and disconnect the power cord and telephone cord. 2. Unlock the bezel lock with the - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 12
Tabs and Slots Thumbscrews Cover 3 Figure 2-1. Removing the Cover (NetServer LH 3) 4 - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 13
Removing the Cover (NetServer LH 3r) 1. Turn off the HP NetServer and disconnect all power and telephone cords. 2. Remove the bezel, the bezel hinge, and the screws securing the latch plate to the front-right rack upright (see Figure 2-2). 3. Slide out the NetServer until the rail locks "click" into - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 14
Latch Plate Bezel Hinge Bezel Figure 2-2. Sliding Out the NetServer From the Rack 6 - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 15
4. Loosen the thumbscrew at the front of cover 2 and pull the cover forward, using the handle on the cover, and then lift it off the chassis (see Figure 2-3). Cover 2 Thumbscrew Figure 2-3. Removing the Cover (NetServer LH 3r) 7 - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 16
socket (see Figure 2-4). 2. Slide the system board out of the chassis and place it on a staticdissipating work surface (see Figure 2-5). CAUTION Place the NetServer LH 3r system board on the work surface so that the metal bracket extends off of the work surface (see Figure 2-5). Failure to orient - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 17
System Board Retaining Latches Figure 2-4. Removing the System Board (NetServer LH 3r) 9 - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 18
Metal support must be OFF work surface; system board must lie flat. System Board Static-dissipating Work Surface Figure 2-5. Orienting the System Board (NetServer LH 3r) 10 - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 19
warranty or support configurations that use non-HP DIMMs. Installation Guidelines You can use 64 MB, 128 MB, and 256 MB DIMMs for a maximum capacity of 1 GB of RAM. Note the following installation guidelines before adding memory: • The minimum memory configuration for the NetServer LH 3/LH 3r is - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 20
• DIMMs may be installed in any quantity and in any DIMM socket on the system board. DIMMs that differ in capacity can be mixed. System Board DIMM Socket 0 DIMM Socket 1 DIMM Socket 2 DIMM Socket 3 Figure 3-1. DIMM Socket Location 12 - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 21
Installing DIMMs 1. Remove an HP DIMM from its container, handling the module by its ends; do not touch the pins. Lay it on an anti-static surface. 2. Locate the socket - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 22
directly downward. If the retaining clips do not close, remove the module and repeat Steps 3 through 5. 6. Repeat Steps 1 through 5 to install all DIMMs. 7. On the NetServer LH 3r, reinstall the system board. 8. Replace the cover and bezel. 14 - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 23
After installing the memory, replace the cover and bezel. HP NetServer LH 3 1. Insert the tabs inside the cover into the the chassis until it snaps into place. Lock the bezel lock with the key provided. HP NetServer LH 3r 1. Insert the tabs inside the cover into the slots in the chassis and slide - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 24
3. Reinstall the latch plate, bezel hinge, and bezel (see Figure 2-2). 4. Replace all power, telephone, and I/O cables. 16 - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 25
by the original end-user purchaser. Once installed in an HP NetServer, this accessory may carry the longer of either a one-year warranty or the remainder of the warranty period for the NetServer in which it is installed. This accessory may be serviced through expedited part shipments. In this event - HP LH4r | HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 26
HP Repair and Telephone Support Refer to the Service and Support chapter of your HP NetServer system documentation for instructions on how to obtain HP repair and telephone support 18
HP NetServer LH 3/LH 3r
DIMM Installation Guide
HP Part Number 5967-2105
Printed in May 1998