HP LH4r HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 21
Notches, Retaining Clips, Installing the DIMM In a Socket
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Installing DIMMs 1. Remove an HP DIMM from its container, handling the module by its ends; do not touch the pins. Lay it on an anti-static surface. 2. Locate the socket in which you will install the DIMM. Spread the two retaining clips outward (see Figure 3-2). DIMM Notches Keys Retaining Clips Figure 3-2. Installing the DIMM In a Socket 3. Align the notches on the DIMM with the keys in the socket (see Figure 3-2). 13
13
Installing DIMMs
1.
Remove an HP DIMM from its container, handling the module
by its ends; do not touch the pins. Lay it on an anti-static surface.
2.
Locate the socket in which you will install the DIMM. Spread the
two retaining clips outward (see Figure 3-2).
Notches
Keys
Retaining Clips
DIMM
Figure 3-2. Installing the DIMM In a Socket
3.
Align the notches on the DIMM with the keys in the socket (see
Figure 3-2).