HP LH4r HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 22
Repeat Steps 1 through 5 to install all DIMMs.
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
4. Hold the DIMM at a 90-degree angle to the system board. 5. Insert the DIMM carefully into the socket. The retaining clips will close automatically if it is inserted properly. CAUTION Do not rock the DIMM into place, but apply firm and even pressure directly downward. If the retaining clips do not close, remove the module and repeat Steps 3 through 5. 6. Repeat Steps 1 through 5 to install all DIMMs. 7. On the NetServer LH 3r, reinstall the system board. 8. Replace the cover and bezel. 14
14
4.
Hold the DIMM at a 90-degree angle to the system board.
5.
Insert the DIMM carefully into the socket. The retaining clips
will close automatically if it is inserted properly.
CAUTION
Do not rock the DIMM into place, but apply firm
and even pressure directly downward
. If the
retaining clips do not close, remove the module and
repeat Steps 3 through 5.
6.
Repeat Steps 1 through 5 to install all DIMMs.
7.
On the NetServer LH 3r, reinstall the system board.
8.
Replace the cover and bezel.