HP LH4r HP Netserver LH 3/LH 3r DIMM Installation Guide - Page 19
Installing DIMMs
 |
View all HP LH4r manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
3 Installing DIMMs This chapter includes guidelines and instructions for installing DIMMs in the specified sequence on the system board. CAUTION Use only DIMMs acquired from HP. Contact HP Customer Support for a list of qualified DIMMs. HP will not warranty or support configurations that use non-HP DIMMs. Installation Guidelines You can use 64 MB, 128 MB, and 256 MB DIMMs for a maximum capacity of 1 GB of RAM. Note the following installation guidelines before adding memory: • The minimum memory configuration for the NetServer LH 3/LH 3r is one 128 MB DIMM. • The system board DIMM sockets are numbered from 0 to 3, as shown in Figure 3-1. 11
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22 -
23 -
24 -
25
-
26
 |
 |
11
3
Installing DIMMs
This chapter includes guidelines and instructions for installing DIMMs
in the specified sequence on the system board.
CAUTION
Use only DIMMs acquired from HP. Contact HP
Customer Support for a list of qualified DIMMs. HP
will not warranty or support configurations that use
non-HP DIMMs.
Installation Guidelines
You can use 64 MB, 128 MB, and 256 MB DIMMs for a maximum
capacity of 1 GB of RAM. Note the following installation guidelines
before adding memory:
•
The minimum memory configuration for the
NetServer LH 3/LH 3r is one 128 MB DIMM.
•
The system board DIMM sockets are numbered from 0 to 3, as
shown in Figure 3-1.