HP Laser 408 User Guide - Page 22
Installing the software
View all HP Laser 408 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Installing the software After you have set up your machine and connected it to your computer, you must install the printer software. The PCL 6 printer-specific print driver is available for download from the printer support website. Download the driver, and then use the Microsoft Add Printer tool to install it. Before installing, check whether your computer's OS support the software (see "Operating System" on page 7). For HP's all-inclusive help for the printer, go to www.hp.com/support/laser408. Find the following support: • Install and configure • Learn and use • Solve problems • Download software and firmware updates • Join support forums • Find warranty and regulatory information • A locally connected machine is a machine directly attached to your computer using the cable. If your machine is attached to a network, skip the following steps below and go on to installing a network connected machine's driver (see "Installing driver over the network" on page 44). • When using HP UPD, HP recommends network connection instead of USB connection. Due to constraint of USB bi-directional communication, the driver by USB connection provides only limited option. Only use a USB cable no longer then 3 meters (118 inches). Installing the software | 22