HP Laser 408 User Guide - Page 83
Installing accessories, Precautions, Setting Device Options
View all HP Laser 408 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Installing accessories Precautions • Disconnect the power cord Never remove the control board cover while the power is turned on. To avoid the possibility of an electrical shock, always disconnect the power cord when installing or removing ANY internal or external accessories. • Discharge static electricity The control board and internal accessories (network interface card or memory module) are sensitive to static electricity. Before installing or removing any internal accessories, discharge static electricity from your body by touching something metal, such as the metal back plate on any device plugged into a grounded power source. If you walk around before finishing the installation, repeat this procedure to discharge any static electricity again. When installing accessories, the battery inside the machine is a service component. Do not change it by yourself. There is a risk of an explosion if battery is replaced by an incorrect type. Your service provider should remove the old battery from your device and dispose of it in accordance with the relevant regulations in your country. Setting Device Options When you install the optional devices such as optional tray, memory, etc, this machine automatically detects and sets the optional devices. If you cannot use the optional devices you installed in this driver, you need to set the optional devices in Device Options. 1 Click the Windows Start menu. 2 Select Printers and Faxes. 3 Right-click your machine. 4 Select Properties or Printer properties. The Properties window may differ depending on the driver or operating system you are using. 5 Select Device Options. 6 Select the appropriate option. Installing accessories | 83