HP LaserJet 3300 HP LaserJet 3300mfp Series - (English) Getting Started Guide - Page 14

Note Note HP does not recommend using HP Jetdirect print servers with firmware earlier than that listed above. To check the firmware version number, see your print server's documentation for instructions on printing a configuration page. If you have an HP Jetdirect 170x print server and the model number is not J3258B, your print server is not compatible with the HP LaserJet 3300 series product. If you have an HP Jetdirect 300x or 500x print server and the firmware version number is not H.08.00 or J.08.00 or higher, you must download a firmware upgrade from HP's web site at http://www.hp.com/support/net_printing to use your print server with HP LaserJet 3300 series products. To use a supported HP Jetdirect print server If you are connecting your product to a network with an HP Jetdirect print server purchased separately from an HP LaserJet 3320n product, use the following procedure to set up your product. 1 Follow the instructions in this guide to assemble your product's hardware. 2 See your print server's documentation to connect the HP LaserJet 3300 series product to a network using one of the supported HP Jetdirect print servers listed above. 3 See "Installing the software" on page 21 to install the product software included with your HP LaserJet 3300 series product. Do not install the software included with any separately purchased HP Jetdirect print server. Use the product software on your HP LaserJet 3300 series product CD-ROM. 10 1 Introduction ENWW