HP LaserJet 3300 HP LaserJet 3300mfp Series - (English) Getting Started Guide - Page 26

Note Note Note You can scan with the product software or any compatible TWAIN-compliant scanning application. A list of compatible applications is included in the readme.txt file on the product's CD-ROM. To install the software (Windows) Use the instructions below to install the product software on a PC running Windows 95, 98, NT 4.0 SP3, ME, 2000, or XP. Windows 95 users will have basic software functionality only. For information on installing the printer driver only, see the next section. You must have Administrator privileges (on start and restart) to install the software on Windows NT 4.0 SP3, XP, or 2000. 1 Quit any open programs on your PC. If the New Hardware Wizard appears, click Cancel. 2 To open the Welcome screen, insert the product software CD-ROM in your computer's CD drive. • If the Welcome screen does not open, click Start on the Windows task bar, click Run, type Z:\setup (where Z is your CD drive letter), and click OK. 3 Follow the onscreen instructions. 4 Click Software Installation. 5 Follow the onscreen instructions to install the software. • If the product is connected to a network, select Connected to the network when prompted, then select the type of network connection. • Before installation is complete, select Print a test page when the prompt appears. 6 Click Finish. 7 If you are prompted to restart your computer, click Yes. The test page prints after your computer restarts. If you are not prompted to restart your computer, a test page prints immediately. 8 If the test page prints correctly, installation is complete. If the test page does not print correctly, see "Troubleshooting" on page 25. On systems running Windows 2000, or Windows 98 systems with a USB connection, the New Hardware Wizard window may be displayed after you restart the computer. If this happens, click Next to complete the install process. 22 2 Setting up your product ENWW