HP LaserJet 9065mfp HP LaserJet 9055/9065 mfp - Software Technical Reference ( - Page 76
MFP messages during the firmware update, Return to Device Group
View all HP LaserJet 9065mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Note Note 54 5 Locate the drop-down box for Device Tools in the upper-right corner of the window. Select Update Printer Firmware from the choose action list. 6 If the name of the .RFU file is not listed in the All Available Images dialog box, click Browse in the Upload New Firmware Image dialog box and navigate to the location of the .RFU file that you downloaded from the Web at the start of this procedure. If the filename is listed, select it. 7 Click Upload to move the .RFU file from your hard drive to the HP Web Jetadmin server. 8 Refresh the browser. 9 Select the .RFU file from the Printer Firmware Update drop-down menu. 10 Click Update Firmware. HP Web Jetadmin sends the selected .RFU file to the MFP. The messages described in the section MFP messages during the firmware update appear on the control panel. The MFP automatically turns off and then on again to activate the update. At the end of the update process, the READY message appears on the control panel. HP Web Jetadmin version 7.0 and later can also be used to perform multiple or unattended installations. Complete the following steps for multiple or unattended installations. 1 Start HP Web Jetadmin. 2 Create a device group. A simple way to do this is to follow these steps: a. Click Device Management, then click All Devices. b. Shift-click to select products that you want to be included in the group, and then click OK. c. When prompted, type a name for the new device group, and then click OK. 3 To modify several products in a group, click the group name, and then click Open. 4 The drop-down menu for Device Group Tools appears in the right side of the window. Scroll if necessary to view it. 5 In the Device Group Tools drop-down box, select an action. Type in the appropriate information. Click Return to Device Group when finished. MFP messages during the firmware update Three messages appear during a normal update process. Table 2-6. Update messages MFP message Explanation RECEIVING UPGRADE This message appears from the time the MFP recognizes the beginning of an .RFU update until the time the MFP has verified the validity and integrity of the .RFU update. UPGRADING PRINTER This message appears while the MFP is actually reprogramming the firmware. WAIT FOR PRINTER This message appears from the time the MFP has finished TO REINITIALIZE reprogramming the DIMM until the MFP reinitializes. To verify that the firmware update succeeded, print a new Configuration page from the control panel and verify that the firmware date code on the Configuration page has changed. Remote firmware update EN