HP LaserJet 9065mfp HP LaserJet 9055/9065 mfp - (English) System Administrator - Page 66
Duplex mode , Open the document feeder. Place original face down on the scanner glass
View all HP LaserJet 9065mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Duplex mode Duplex mode using automatic document feeder Before selecting a duplex mode, read specifications on the previous page and see "Positioning originals on the scanner glass" on page 36 for information on positioning originals. 1 Touch the desired mode key on the main screen: 1`1, 1`2, 2`1, or 2`2. A duplex mode key appears dimmed if it is incompatible with other selections made. Note When selecting 1`2 or 2`2, specify the original direction and the binding mode on the Select condition to scan originals menu and the Select finisher mode menu, respectively. See Steps 1 and 2 below for details. 2 Position the originals face up in the document feeder. 3 When all settings are acceptable, press START. To cancel the mode, touch the desired duplex mode key on the main screen. Note When the selected quantity exceeds the finisher maximum capacity, remove the completed jobs while paper is exiting to avoid jams. 1`2 Duplex mode using scanner glass When copying in 1`2 mode from the scanner glass, use the store mode. See "Positioning originals on the scanner glass" on page 36 for details on positioning originals. 1 Touch ORIGINALS on the main screen to display the Select condition to scan originals menu, then touch the desired original direction key to highlight it. Touch OK to return to the main screen. 2 Touch OPTIONS menu to display the Select finisher mode menu, then touch the desired binding mode key to highlight it. Touch OK to return to the main screen. Note Selecting TOP BIND will make copies upside down on the reverse side, while RIGHT & LEFT BIND copies normally. 3 Open the document feeder. Place original face down on the scanner glass, then close the document feeder. Note Place and scan originals in regular order of pagination. 4 Touch 1`2. The STORE key is automatically highlighted on the screen. 5 Make the desired copying selections. 6 Press START to scan the original. Repeat Steps 3 and 6 until all originals are scanned. 7 Touch STORE to exit the store mode. The STORE key will return to the normal display. 8 Enter the quantity of copies desired using the keypad. The quantity entered will be displayed on the upper right message area of the main screen. To change the print quantity, press C CLEAR QTY. and enter the correct quantity. To delete the scanned data without printing, press STOP, then touch EXIT on the popup menu to be sure the data is deleted. 9 Press START to print. Note When the selected quantity exceeds the finisher maximum capacity, avoid jams by removing the completed jobs while paper is exiting. 56 Basic operations ENWW