HP Latex 260 Maintenance and troubleshooting guide - Page 28
Maintain the ink cartridges, Move or store the printer
View all HP Latex 260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
8. Deposit a very thin zig-zag trickle of oil along the rail on both sides of the carriage. There is a video showing the process here: http://www.hp.com/go/L26500/videos NOTE: While lubricating, be careful not to drop oil on the metal strip located on top of the rail. 9. Clean the substrate jam reflector using a lint-free cloth dampened with distilled water. If you find dried ink that you cannot remove, try using a lint-free cloth dampened with 95% ethanol. 10. Press OK at the front panel. 11. Close and lock the window. 12. The Carriage Assembly moves along the rail to distribute the oil along the rail. 13. The Front Panel prompts for confirmation that the lubrication processes has been done. Press OK to confirm. Maintain the ink cartridges During the normal lifetime of a cartridge, no specific maintenance is required. You should replace a cartridge when it has reached its expiration date. See the ink cartridge information on the front panel for the expiration date. Move or store the printer If you need to move your printer or store it for an extended period of time, prepare it correctly to avoid possible damage. 1. Do not remove the ink cartridges, printheads or printhead cleaning cartridge. 2. Make sure that no substrate is loaded. 3. Make sure that the printhead carriage is located in the service station (at the right end of the printer). 22 Chapter 4 Hardware maintenance ENWW