HP Latex 570 Site preparation guide - Page 7
Site preparation requirements, Physical space requirements, Unloading route, Environmental
View all HP Latex 570 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
2 Site preparation requirements Physical space requirements Unloading route The route between the unloading area of the printer and the installation site, including any corridors and doorways through which the printer must be transported, is important to proper site preparation and must be checked before the arrival of the printer. This pathway must be clear when the printer arrives. Table 2-1 Physical specifications HP Latex 560 in package HP Latex 570 in package HP Latex 560 Printer HP Latex 570 Printer Dimensions L2750 x W1037x H1689 L2750 x W1037x H1689 L2560 x W792 x H1420 L2560 x W792 x H1420 Weight (kg) 330 360 220 250 Doorways without packaging: minimum width 1.01 m (40 in) × minimum height 1.67 m (66 in) required. IMPORTANT: Maximum ramp slope 6º. NOTE: The printer body cannot be disassembled from the legs. Correct printer functionality cannot be assured. The space required for assembly is 1.5 m (5 ft) front and rear, and 7.7 m (25.3 ft) at the side. Most of the installation process requires one person, but two people are required to perform certain tasks. Environmental specifications These environmental conditions must be kept within the specified ranges to ensure the correct operation of the printer. Failure to do so may cause print-quality problems or damage sensitive electronic components. ENWW Physical space requirements 3