HP Latex 820 Users Guide - Page 65
Side B: Load and print, Maintain the same orientation, Substrate Edge, Detection
View all HP Latex 820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
4. Remove the output spindle (1), carry it around to the input side with the same orientation (2) and install it into the input position (3). Maintain the same orientation: Left edge always on the left, as indicated below with the colors blue and red. Handle the substrate 5. When completed, click Done in the IPS window to confirm. Side B: Load and print 1. Load Roll-to-Roll configuration Load a roll (roll-to-roll configuration) on page 38. NOTE: By default the left edge of the substrate is detected to minimize registration errors along the scan axis when printing double-sided. When printing on translucent substrates or types of substrate with irregular edges you can disable this option by clicking Substrate Edge Detection. 2. Align the registration line with the beginning of the platen. ● If Side B: Calibration space was selected: ◦ Align the dotted line. ENWW Double-sided printing 61