HP Latex 820 Users Guide - Page 99
Substrate Edge Detection, Rows to register, Print Job, Load Side B refer
![]() |
View all HP Latex 820 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
5. Check that the optical advance sensor is clean, do not hesitate to clean it, refer to the Maintenance & Troubleshooting Guide -> Hardware Maintenance -> Clean the substrate-advance sensor. 6. Load Side B refer to Side B: Load and print on page 61 NOTE: For accurate printing we recommend that Substrate Edge Detection is selected. 7. When Side B is loaded perform the following, for more details of these procedures refer to Side B: Load and print on page 61: a. Align the dotted line with the platen b. Perform the calibrations (advance calibrations and dynamic color registration, refer to the Maintenance & Troubleshooting Guide). c. Select Side B from the drop menu. d. Ensure that the Image Registration Line is aligned with the platen and start printing side B. e. Configure Rows to register, refer to Define double-sided job on page 90. f. Select save or save as. g. Select Print Job and print the selected image. While printing Side B the printer will automatically read each registration line and Side B will be positioned to minimize the registration errors NOTE: To activate the side you want to print, always select it from the drop down menu first, make any changes to the image and select save. NOTE: If you select Print Job and the printer cannot detect the Image Registration Line, refer to the Maintenance and Troubleshooting Guide. ENWW Layout method 95 Printing
![](/manual_guide/products/hewlettpackard-latex-850-users-guide-d575864/99.png)