HP M5035 HP LaserJet M5025 and M5035 MFP Product Series - Solutions provided b - Page 3

PRINT JOB The time values available for this feature will be presented under the "HOLD OFF TIME" menu item which will becomes available after turning this feature on. ¾ A 49.4c02 error may be seen on the HP Easy Select control panel when printing documents with certain Franklin Gothic Book True Type Fonts. ¾ When selecting Manual Feed for copy paper source in German, the display is not localized. ¾ A 49.00FF error may occur when printing certain PDF's. ¾ When devices Embedded Web Server is viewed in the Japanese language, the Event Log Page displays garbage characters in the "Description and Personality" field ¾ The short cut numerical steps provided on the Printed Menu Map are not accurate ¾ MFP will roll to a different NTP server when configured by hostname if named server is not available ¾ Intermediate and Maximum control panel lock settings do not lock tray settings. With this release, the Modify button is grayed out with these CP Lock settings ¾ The text for the HP Easy Select control panel Copy selection for the 2 sided to 2 sided copy selection is not localized correctly in German ¾ When the HP Easy Select Control Panel is set to Japanese the date and time are not presented correctly ¾ The Book Copy screen and Skip page description that are found on the HP Easy Select control panel are not localized correctly for most languages ¾ A 49.4c01 error may be seen almost daily on the HP Easy Select control panel when using the Scheduled Fax Printing feature. ¾ The Time Zones names are not displaying in the dropdown of the Advanced Date and Time page in the devices Embedded Web Server ¾ Some duplexed documents may output incorrectly when the print job sources paper from more than one tray on the device ¾ The devices Embedded Web Server's Security page is not localized correctly for UTF-8 languages ¾ A 49.FF09 may be seen on the HP Easy Select control panel when updating the devices firmware when devices language is set to one of the following languages (Japanese, Chinese, Korean) ¾ Auto Settings Reset time is based on Inactivity Timeout rather than Auto Settings Reset timer ¾ Event log may show values above 59 seconds instead of rolling to minutes ¾ A 49.5001 error may be presented on the HP Easy Select control panel. ¾ Device Status (i.e.. "Sleep mode on") does not display in Chinese, Japanese or Korean. ¾ If a print job is sent to the device while a copy job is printing, the print job may not print for a long period of time after the copy job has completed. Note: The ability to control the "Hold Off Print Job" feature has been added back into the device with this release and this feature will also intentionally delay print jobs ¾ Configuration page indicates Control Panel Lock set to Intermediate instead of Maximum Page 3 of 5