HP MSA2324sa HP StorageWorks 2000 G2 Modular Smart Array reference guide (5009 - Page 81
HP StorageWorks 2000 G2 Modular Smart Array Reference Guide, Table 10
View all HP MSA2324sa manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Table 10 FA MIB 2.2 objects, descriptions, and values (continued) Object Description Value connUnitPortTable connUnitPortUnitId connUnitPortIndex connUnitPortType connUnitPortFCClassCap connUnitPortFCClassOp connUnitPortState connUnitPortStatus connUnitPortTransmitter Type connUnitPortModuleType connUnitPortWwn connUnitPortFCId Includes the following objects as specified by the FA MIB2.2 Spec connUnitId of the connectivity unit Same as connUnitId that contains this port Unique value for each connUnitPortEntry between 1 and connUnitNumPorts Unique value for each port, between 1 and the number of ports Port type not-present[3], or n-port[5] for point-to-point topology, or l-port[6] Bit mask that specifies the classes of service capability of this port. If this is not applicable, returns all bits set to zero. Fibre Channel ports return 8 for class-three Bit mask that specifies the classes of service that are currently operational. If this is not applicable, returns all bits set to zero. Fibre Channel ports return 8 for class-three State of the port hardware unknown[1], online[2], offline[3], bypassed[4] Overall protocol status for the port unknown[1], unused[2], ok[3], warning[4], failure[5], notparticipating[6], initializing[7], bypass[8] Technology of the port transceiver unknown[1] for Fibre Channel ports Module type of the port connector Fibre Channel World Wide Name (WWN) of the port if applicable Assigned Fibre Channel ID of this port unknown[1] WWN octet for the port, or empty string if the port is not present • Fibre Channel ID of the port • All bits set to 1 if the Fibre Channel ID is not assigned or if the port is not present connUnitPortSn connUnitPortRevision connUnitPortVendor connUnitPortSpeed connUnitPortControl connUnitPortName connUnitPortPhysical Number connUnitPortStatObject Serial number of the unit (for example, for a GBIC). If this is not applicable, returns an empty string. Empty string Port revision (for example, for a GBIC) Empty string Port vendor (for example, for a GBIC) Empty string Speed of the port in KByte per second (1 KByte = 1000 Byte) Port speed in KByte per second, or 0 if the port is not present Not supported invalid[2] for an SNMP GET operation and not settable through an SNMP SET operation String describing the addressed port See External details for connUnitPortTable on page 85 Port number represented on the hardware Port number represented on the hardware Not supported 0 (No statistics available) HP StorageWorks 2000 G2 Modular Smart Array Reference Guide 81