HP MSA70 HP StorageWorks 70 Modular Smart Array Enclosure User Guide (434893-0 - Page 18
Installing the enclosure into the rack, Secure the front end of the rails to the rack.
![]() |
View all HP MSA70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installing the enclosure into the rack To install the enclosure into a rack: 1. Secure the front end of the rails to the rack. IMPORTANT: Do not remove the pins from the ends of the rack rails unless you are converting the rails for use in round-hole racks. These load-bearing pins are designed to fit through the holes without being removed. IMPORTANT: Be sure that the scissor-type locking latches engage the rack fully when the pins extend through the holes marked with the template. NOTE: Identify the left (L) and right (R) rack rails by markings stamped into the sheet metal. 2. Secure the back end of the rails to the rack. IMPORTANT: Be sure that the scissor-type locking latches engage the rack fully when the pins extend through the holes marked with the template. 18 Installing the enclosure
![](/manual_guide/products/hewlettpackard-418800b21-hp-storageworks-70-modular-smart-array-enclosure-user-guide-434893003-2010-a7455c4/18.png)