HP Media Center 894c HP Media Center Desktop PCs - (English) Hardware User Gui - Page 18
HP Media Center 894c Manual
View all HP Media Center 894c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Connecting the Remote Sensor Remote Sensor Connect remote control receiver to computer The remote sensor is a small device that connects to the PC and allows the remote control to work with the Media Center program. If you have a cable TV set-top box, satellite, or other set-top box that controls your TV signal, connect the remote sensor control cable to the remote sensor and position the end of it over the remote receiver on your cable box. For information on using the control cable in an existing setup, see "Optional Connections." 1 Plug the remote sensor cable into a USB connector on the back of the PC. 2 Place the remote sensor so that you can easily point Cable or satellite set-top box at it with the remote control. (An ideal spot would be on top of the monitor or desk.) the back of the remote sensor. Position the end of the control cable over the remote IR receiver window on your cable TV set-top box. Remove the paper from the backing tape on the end of the cable. Press the end of the cable into place over the IR window on your box. If you use a cable or satellite set-top box, pass the signal through the remote sensor Remote sensor control cable 3 If needed, plug the remote sensor control cable into Locate IR window on set-top box. Adhere to IR window. Remove backing tape 10