HP Media Center 894c HP Media Center Desktop PCs - (English) Hardware User Gui - Page 65
HP Media Center 894c Manual
View all HP Media Center 894c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Removing a memory module Installing a memory module 1 Remove the fan duct. (See page 48.) 2 Locate the memory sockets on the motherboard. Move any cabling out of the way, if necessary. 1 Push down the two retaining clips on the ends of the memory socket. 2 Holding the new memory module by its top edge or side edges only, remove it from the antistatic packaging. 3 Push down the two retaining clips on the ends of 4 Holding the memory module by its top edge or the socket until the memory module pops out of the socket. side edges only, lift it away from the socket. Store it in antistatic packaging. 3 Position the memory module in alignment with the socket (the one or two small notches on the lower edge of the module fit into the raised bumps in the socket). Push straight down on top of the memory module until it is fully seated in the socket. The socket retaining clips automatically lock it into position when the memory module is fully seated. Do not pull the memory module out of the socket. Use the retaining clips to eject the module. w 4 Replace the fan duct. (See page 48.) Avoid touching the memory chips or the gold contacts on the module. n Upgrading 57