HP Mellanox SX1018 Mellanox MLNX-OS Command Reference Guide for SX1018HP Ether - Page 33
dhcp
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Rev 1.6.2 dhcp dhcp [renew] no dhcp Syntax Description Default Modes/Context History Role Example Related Commands Note Enables DHCP on the specified interface. The no form of the command disables DHCP on the specified interface. renew Forces a renewal of the IP address. A restart on the DHCP client for the specified interface will be issued. Could be enabled or disabled (per part number) manufactured with 3.2.0500 Config Interface Management 3.1.0000 admin switch (config interface mgmt0) # dhcp switch (config) # show interfaces mgmt0 configured Interface mgmt0 configuration Enabled: yes DHCP: yes Zeroconf: no IP address: Netmask: IPv6 enabled: yes Autoconf enabled: no Autoconf route: yes Autoconf privacy: no IPv6 addresses: 0 Speed: auto Duplex: auto MTU: 1500 Comment: show interfaces configured • When enabling DHCP, the IP address and netmask are received via DHCP hence, the static IP address configuration is ignored • Enabling DHCP disables zeroconf and vice versa • Setting a static IP address and netmask does not disable DHCP. DHCP is disabled by using the "no" form of this command, or by enabling zeroconf. Mellanox Technologies 33