HP Mellanox SX1018 Mellanox MLNX-OS Command Reference Guide for SX1018HP Ether - Page 330
mac-address-table static
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 330 highlights
Rev 1.6.2 mac-address-table static mac-address-table static vlan interface no mac-address-table static vlan interface Configures a static MAC address in the forwarding database. The no form of the command deletes a configured static MAC address from the forwarding database. Syntax Description mac address Destination MAC address. vlan VLAN ID or VLAN range. if-type Ethernet or port-channel interface type. if-number The interface number (i.e. 1/1, 3). Default No static MAC addresses available in default. Modes/Context Config History 3.1.0600 Role admin Example switch (config) # mac-address-table static aa:aa:aa:aa:aa:aa vlan 1 interface ethernet 1/7 switch (config) # show mac-address-table Switch ethernet-default Related Commands Vlan Mac Address 1 aa:aa:aa:aa:aa:aa Number of unicast: 1 Number of multicast: 0 switch (config) # show mac-address-table mac-address-table aging time Type ---static Interface Eth1/7 Note The no form of the command will not clear a dynamic MAC address. Dynamic MAC addresses are cleared using the "clear mac-address-table dynamic" command. Mellanox Technologies 330