HP Mellanox SX1018 Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage
HP Mellanox SX1018 Manual
View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Mellanox SX1018 manual content summary:
- HP Mellanox SX1018 | Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 1
Mellanox MLNX-OS™ Release Notes for SX1018HP Ethernet Managed Blade Switch Software Ver. 3.3.1000 www.mellanox.com - HP Mellanox SX1018 | Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 2
2 Mellanox Technologies HP Document Number: 734350-001 - HP Mellanox SX1018 | Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 3
and Cables 4 2.1 Supported Switch Systems 4 2.2 Supported CPU Architecture 4 2.3 Supported Firmware 4 2.4 Supported Cables 4 Chapter 3 Changes and New Features 5 Chapter 4 Known Issues 6 4.1 General Known Issues 6 4.2 Ethernet Known Issues 7 Chapter 5 Bug Fixes 9 Mellanox Techologies 3 - HP Mellanox SX1018 | Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 4
These are the Mellanox MLNX-OS™ Release Notes for HP 689638-B21. 2 Supported Platforms, Firmware and Cables 2.1 Supported Switch Systems Table 1 - Supported Switch Systems Part Number Description SX1018HP 34-Port 40Gb/s Ethernet Blade Switch System 2.2 Supported CPU Architecture • PPC - HP Mellanox SX1018 | Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 5
- SX1018HP Changes and the WebUI Release 3.2.1302 Added support for SNMPv3 notifications Bug fixes Release up/down events Added policy based VLAN Added support in WebUI for: • STP • VLAN • QBRIDGE-MIB, Entity MIB support and Private MIB restructuring. Refer to MLNX-OS User Manual, SNMP chapter for - HP Mellanox SX1018 | Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 6
4 Known Issues For any possible errata due to hardware issues, please refer to the switch support product page. 4.1 The following table describes MLNX-OS™ known issues in this software release and possible on an SX6036/SX6536/SX1035 sys- tem may cause the system to hang. Mellanox Technologies 6 - HP Mellanox SX1018 | Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 7
data after setting the clock. 16. SNMP LLDP MIB OID lldpRemPortDesc is not supported. 17. Chassis Management Supported USB flash drives are USBv2 protocol and above. 18. Chassis Management Duplicate seconds. Shut down the port prior of removing it from the LAG. Mellanox Technologies 7 - HP Mellanox SX1018 | Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 8
traffic loss of up to 30 seconds. Setting the "ip igmp snooping unregistered multicast" option to "forward-to-mrouter-ports" option reduces the amount of supported VLANs to 250. A mask of IPv4 ACL rule can contain either 255 or 0 in any of the 4 bytes assembling it. ACL is not - HP Mellanox SX1018 | Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 9
not supported. MLNX-OS shows the model type of ME as "SX689638" when it is actually "SX1018HP". GUID. LLDPDUs with the wrong EtherType are not discarded. The SwitchX management address is not advertised on splitter ports. There is no enforcement for configuring out-of-range VLAN in ACL. Mellanox - HP Mellanox SX1018 | Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 10
. MAC packets are discarded when the IPv4 ACL deny rule is defined. SDKd process errors may appear during reload (shutdown phase) or switching system profile. Mellanox Techologies 10
www.mellanox.com
Mellanox MLNX-OS™ Release Notes
for
SX1018HP Ethernet
Managed Blade Switch
Software Ver. 3.3.1000