HP Mellanox SX1018 Mellanox MLNX-OS Release Notes for SX1018HP Ethernet Manage - Page 7

Ethernet Known Issues

Get HP Mellanox SX1018 PDF manuals and user guides View all HP Mellanox SX1018 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

4.2 Table 3 - General Known Issues (Sheet 2 of 2) Index Category Description Possible Workaround 8. Configuration Manage- After loading a new configuration file, please ment reboot the system. Otherwise, configuration might not be properly applied. 9. Configuration Manage- The command configuration revert fac- Use the command reset fac- ment tory is removed. tory instead. 10. Logging "DROPPED MSG" errors may appear during reload (shutdown phase). These errors can be safely ignored. 11. User Management Some RADIUS and TACACS+ configurations keep the user locked out of the machine due to timeout limitation. Press the reset button for 15 seconds, and then log in using your local authentication. Additionally, fix the configuration to avoid any future timeout issues. 12. User Management Restoring admin password is not supported. 13. CLI The feature "Ctrl+C" is not supported in this release. It is advised to avoid using it. 14. WebUI Only a single WebUI login per host is possible. To have multi-sessions, open several browser simultaneously. 15. WebUI Reversing the time clock can result in WebUI graphs' corrupted data. Clear the graphs data after setting the clock. 16. SNMP LLDP MIB OID lldpRemPortDesc is not supported. 17. Chassis Management Supported USB flash drives are USBv2 protocol and above. 18. Chassis Management Duplicate notification is sent upon high temperature alerts, both specific module alerts and general "too high" alerts. 19. IP Routing The current release doesn't support L3. Ethernet Known Issues Table 4 - Ethernet Known Issues Index Category 1. Ethernet Interfaces 2. Ethernet Interfaces 3. LAG Description Possible Workaround The system allows tolerance of 4 bytes on top of the set MTU. In case of faulty cable, rise time of other interfaces in the system may be delayed. Convergence time of port removal from a LAG exceeds the specification by up to 30 seconds. Shut down the port prior of removing it from the LAG. Mellanox Technologies 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Mellanox Technologies
7
4.2
Ethernet Known Issues
Table 4 - Ethernet Known Issues
8.
Configuration Manage-
ment
After loading a new configuration file, please
reboot the system. Otherwise, configuration might
not be properly applied.
9.
Configuration Manage-
ment
The command
configuration revert fac-
tory
is removed.
Use the command reset fac-
tory instead.
10.
Logging
“DROPPED MSG” errors may appear during
reload (shutdown phase). These errors can be
safely ignored.
11.
User Management
Some RADIUS and TACACS+ configurations
keep the user locked out of the machine due to
timeout limitation.
Press the reset button for 15
seconds, and then log in
using your local authentica-
tion. Additionally, fix the
configuration to avoid any
future timeout issues.
12.
User Management
Restoring admin password is not supported.
13.
CLI
The feature “Ctrl+C” is not supported in this
release.
It is advised to avoid using
it.
14.
WebUI
Only a single WebUI login per host is possible.
To have multi-sessions,
open several browser simul-
taneously.
15.
WebUI
Reversing the time clock can result in WebUI
graphs’ corrupted data.
Clear the graphs data after
setting the clock.
16.
SNMP
LLDP MIB OID lldpRemPortDesc is not sup-
ported.
17.
Chassis Management
Supported USB flash drives are USBv2 protocol
and above.
18.
Chassis Management
Duplicate notification is sent upon high tempera-
ture alerts, both specific module alerts and general
“too high” alerts.
19.
IP Routing
The current release doesn’t support L3.
Index
Category
Description
Possible Workaround
1.
Ethernet Interfaces
The system allows tolerance of 4 bytes on top of
the set MTU.
2.
Ethernet Interfaces
In case of faulty cable, rise time of other interfaces
in the system may be delayed.
3.
LAG
Convergence time of port removal from a LAG
exceeds the specification by up to 30 seconds.
Shut down the port prior of
removing it from the LAG.
Table 3 - General Known Issues
(Sheet 2 of 2)
Index
Category
Description
Possible Workaround