HP Mini 110-4100 HP Mini 210, HP Mini 110, Compaq Mini CQ10 - Maintenance and - Page 61

Remove the Phillips PM2.0×3.0 screw

Page 61 highlights

The service cover is available using the following spare part numbers: ● 663676-001-In black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models ● 650727-001-In charcoal finish for use only on HP Mini 210 computer models ● 650732-001-In crimson red finish for use only on HP Mini 210 computer models ● 650731-001-In luminous rose for use only on HP Mini 210 computer models ● 650728-001-In ocean drive for use only on HP Mini 210 computer models ● 654203-001-In sweet purple finish for use only on HP Mini 210 computer models 3. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The #1 WLAN antenna cable is connected to the WLAN module "Main" terminal. The #2 WLAN antenna cable is connected to the WLAN module "Aux" terminal. 4. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the system board. (The WLAN module tilts up.) Component replacement procedures 53

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114

The service cover is available using the following spare part numbers:
663676-001—In black finish for use only on Compaq Mini CQ10 and HP Mini 110
computer models
650727-001—In charcoal finish for use only on HP Mini 210 computer models
650732-001—In crimson red finish for use only on HP Mini 210 computer models
650731-001—In luminous rose for use only on HP Mini 210 computer models
650728-001—In ocean drive for use only on HP Mini 210 computer models
654203-001—In sweet purple finish for use only on HP Mini 210 computer models
3.
Disconnect the WLAN antenna cables
(1)
from the terminals on the WLAN module.
NOTE:
The #1 WLAN antenna cable is connected to the WLAN module “Main” terminal.
The #2 WLAN antenna cable is connected to the WLAN module “Aux” terminal.
4.
Remove the Phillips PM2.0×3.0 screw
(2)
that secures the WLAN module to the system board.
(The WLAN module tilts up.)
Component replacement procedures
53