HP Mini 210-2100 HP Mini 210 - Maintenance and Service Guide - Page 62
top cover to the base enclosure., Disconnect the speaker cable
View all HP Mini 210-2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4. Turn the computer upside down, with the front toward you. 5. Remove the rear rubber feet, and then the 2 Phillips 2.5x5.0 screws (1) under the feet. 6. Remove the 2 Phillips 2.0x5.0 screws (2) and the 3 Phillips 2.0x4.0 screws (3) that secure the top cover to the base enclosure. 7. Turn the computer right-side up, with the front toward you. 8. Open the computer as far as possible. 9. Disconnect the speaker cable (1) from the system board. 52 Chapter 4 Removal and replacement procedures
4.
Turn the computer upside down, with the front toward you.
5.
Remove the rear rubber feet, and then the 2 Phillips 2.5x5.0 screws
(1)
under the feet.
6.
Remove the 2 Phillips 2.0x5.0 screws
(2)
and the 3 Phillips 2.0x4.0 screws
(3)
that secure the
top cover to the base enclosure.
7.
Turn the computer right-side up, with the front toward you.
8.
Open the computer as far as possible.
9.
Disconnect the speaker cable
(1)
from the system board.
52
Chapter 4
Removal and replacement procedures