HP Mini 210-4001xx HP Mini 210, HP Mini 110, Compaq Mini CQ10 - Maintenance an - Page 61
Remove the Phillips PM2.0×3.0 screw
View all HP Mini 210-4001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
The service cover is available using the following spare part numbers: ● 663676-001-In black finish for use only on Compaq Mini CQ10 and HP Mini 110 computer models ● 650727-001-In charcoal finish for use only on HP Mini 210 computer models ● 650732-001-In crimson red finish for use only on HP Mini 210 computer models ● 650731-001-In luminous rose for use only on HP Mini 210 computer models ● 650728-001-In ocean drive for use only on HP Mini 210 computer models ● 654203-001-In sweet purple finish for use only on HP Mini 210 computer models 3. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module. NOTE: The #1 WLAN antenna cable is connected to the WLAN module "Main" terminal. The #2 WLAN antenna cable is connected to the WLAN module "Aux" terminal. 4. Remove the Phillips PM2.0×3.0 screw (2) that secures the WLAN module to the system board. (The WLAN module tilts up.) Component replacement procedures 53