HP Mini 210-4001xx HP Mini 210, HP Mini 110, Compaq Mini CQ10 - Maintenance an - Page 93
If it is necessary to replace the wireless antenna cables and transceivers
View all HP Mini 210-4001xx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
8. If it is necessary to replace the display panel cable: CAUTION: Make sure the work surface is free of any foreign objects before turning the display panel upside down. Failure to clear the work surface can result in scratches and damage to the display panel surface. a. Turn the display panel upside down with the bottom edge toward you. b. Release the tabs (1) built into the shielding on the back of the display panel that conceal the display panel connector and secure the display panel cable. c. Release the adhesive strip (2) that secures the display panel cable to the display panel, and then disconnect the display panel cable (3) from the display panel. d. Remove the display panel cable. The display panel cable includes the webcamera/ microphone module cable and is available in the Display Cable Kit, spare part number 658505-001. 9. If it is necessary to replace the wireless antenna cables and transceivers: a. Release the WLAN antenna transceivers (1) and the WWAN antenna transceivers (2) from the display enclosure. (The antenna transceivers are attached to the display enclosure with double-sided tape.) Component replacement procedures 85